# GRID Command
[GstarCAD 2011](../../Index.md) → [Commands](../%28Commands%29.md) → [G](%28G%29.md)
## Function Description:
> Display a grid pattern in the current viewport
**Command Entry:**
> GRID
**Command Prompt:**
> If display a grid pattern in the current viewport, Command prompt is:
>
> Grid is on: \[OFF/Snap/Aspect\]\<Grid spacing (x and y \= 0.5000)\>:*Specify a value or enter an option*
>
> If don't display a grid pattern in the current viewport, Command prompt is:
>
> Grid is off: \[ON/Snap/Aspect\]\<Grid spacing (x and y \= 0.5000)\>:*Specify a value or enter an option*
>
> **Grid Spacing (X)**
>
> Set the grid to the specified value. Entering
> *x* after the value sets the grid spacing to the specified value multiplied by the snap interval.
>
> **ON**
>
> Turns on the grid using the current spacing.
>
> **Aspect**
>
> Change the grid spacing in the
> *X* and *Y* directions.
>
> Specify the horizontal spacing (X) \<*current*\>:
> *Enter a value or press* ENTER
>
> Specify the vertical spacing (Y) \<*current*\>:
> *Enter a value or press* ENTER
>
> Entering *x* following either value defines it as a multiple of the snap interval rather than the drawing units.
>
> The Aspect option is not available when the current snap style is Isometric.
>
> **OFF**
>
> Turn off the grid.
## Other versions with matching text
[GstarCAD 2012](../../../2012/Commands/G/GRID%20Command.md)