# DIMANGULAR Command [GstarCAD 2011](../../Index.md) → [Commands](../%28Commands%29.md) → [D](%28D%29.md) ## Function Description: > Create an angular dimension **Menu:** > Dimension\>Angle **Command Entry:** > DIMANGULAR **Command Prompt:** > Select arc, circle, line or \<specify vertex\>: *Select an arc, circle, or line, or press* ENTER > *to create the angular dimension by specifying three points* > > After you define the angle to dimension, the following prompt is displayed: > > Specify dimension arc line location or \[Mtext/Text/Angle/Quadrant\]: > > Measure the angle between selected objects or 3 points. Objects that can be selected include arcs, circles, and lines, among others. > > Please refer DIMALIGNED Command about other parameters > > **Select objects:** > > > **Arc Selection:** Use points on the selected arc as the defining points for a three-point angular dimension. The center of the arc is the angle vertex. The arc endpoints become the origin points of the extension lines. > > > > **Circle Selection:** Use the selection point as the origin of the first extension line. The center of the circle is the angle vertex. > > The second angle endpoint is the origin of the second extension line and > > does not have to lie on the circles. > > > > **Line Selection:** Define the angle using two lines. > > **Specify Vertex:** Create the angular dimension by specifying three points ## Other versions with matching text [GstarCAD 2012](../../../2012/Commands/D/DIMANGULAR%20Command.md)